Treatment protocol of dental bleaching and resin infiltration for white spot lesions.

White spot lesions are considered to be a major concern in esthetic dentistry. These lesions can be treated with noninvasive to less invasive procedures, which remain a challenge for many clinicians. The treatment of choice should be as minimally invasive as possible and should aim to minimize the color difference between the white spots and the healthy tooth enamel. Tooth whitening can be used initially to minimize this difference by rendering the extent of the white spot defects less visible, which permits a bevel effect. In addition, the microinvasive treatment option of resin infiltration, which does not involve trauma or require cavity preparation, can supplement the tooth whitening procedure to achieve excellent esthetic results, giving patients renewed confidence in their smiles. Therefore, the purpose of the present study was to illustrate the combination of dental bleaching and resin infiltration in a patient with white spot lesions caused by diffuse opacities (teeth that were undergoing enamel maturation at the time of occurrence of a systemic insult). The treatment aimed to improve the patient's esthetics, self-esteem, and quality of life.

Fragment reattachment or direct restoration? An in vitro study.

BACKGROUND/AIM: The fracture resistance of teeth subjected to fragment reattachment may improve when the technique is performed using intermediate materials. The aim of this study was to evaluate the influence of different bonding materials, including pre-heated composite resin, on the fracture resistance of teeth subjected to the reattachment technique compared with a direct composite resin restoration. MATERIALS AND METHODS: After simulating a tooth fracture, each specimen was reattached by using one of the following intermediate materials (n = 15): G0, negative control (sound teeth); G1, Z100; G2, pre-heated Z100; G3, Filtek Z350 XT; G4, pre-heated Filtek Z350 XT; G5, Filtek Z350 XT Flow; and G6, RelyX Veneer. In G7, direct class IV restorations were performed using Filtek Z350 XT composite resin. The fracture resistance was evaluated using a universal testing machine under a compressive load of 1 mm/min. One-way analysis of variance (ANOVA) and the post hoc Tukey test (5%) were conducted. RESULTS: G0 showed the highest fracture resistance, and this was statistically different from the other experimental groups (p < .05) except for G2 and G4, in which the fragments were bonded using pre-heated resins. A statistically significant difference was found between groups G1 and G6 (one-way ANOVA, p = .04). For G1 and G2, a significant difference was found between bonding with and without pre-heating (p < .05). This difference was not observed in G3 and G4 (p > .05). No statistically significant difference was found between the reattached and directly restored groups (t-test, p = .53). CONCLUSIONS: The tooth reattachment technique using pre-heated composite resin showed fracture resistance values similar to those of the sound tooth group. No difference was found between the fragment reattachment and direct composite resin techniques.

Assessment of the Oral Health Impact Profile (OHIP-14) improvement of different treatments for dentin hypersensitivity in noncarious cervical lesions-a randomized clinical study.

OBJECTIVES: To assess the improvement on oral health-related quality of life (OHRQoL) of individuals with cervical dentin hypersensitivity (CDH) with the noncarious cervical lesion (NCCLs) subjected to different treatments. MATERIAL AND METHODS: A single-blind randomized clinical trial was conducted with patients (n = 74) randomly allocated into three groups according to the treatment performed: PO, potassium oxalate (Oxa-Gel BF); LL, low-power laser irradiation; and POLL, potassium oxalate (Oxa-Gel BF) associated with low-power laser irradiation. The treatments were applied in four steps, weekly. The questionnaire Oral Health Impact Profile (OHIP-14) was applied before initiating and immediately after the fourth session. The greater the sum of the score, the smaller the measurement of OHRQoL. RESULTS: The total mean values of the variables at the final moment were significantly lower than the initial one for all dimensions (p value ranging from < 0.001 to 0.006). Furthermore, the OHIP-14 scores final analysis between the groups indicated that the POLL group compared to LL had a significantly lower final score for the functional limitation (p = 0.009), physical pain (p = 0.049), and psychological discomfort (p = 0.035) dimensions and that group PO compared to group LL had a significantly lower final score for the functional limitation dimension (p = 0.024). CONCLUSIONS: There was a reduction in the OHIP-14 score for all dimensions, indicating an improvement in patients' quality of life after the use of desensitizing therapies. Patients in group LL had a higher functional limitation, physical pain, and psychological discomfort. CLINICAL RELEVANCE: This study indicated improvement of desensitizing therapies for CDH to improve patients' OHRQoL. TRIAL REGISTRATION: This trial was registered in the Brazilian Clinical Trials Registry Platform (REBEC protocol number RBR-4ybjmt).

Manejo de cárie radicular: um guia para o dentista brasileiro baseado na tradução e adaptação cultural do consenso internacional/ORCA E EFCD / Management of root caries: a guide for the Brazilian dentist based on the translation and cultural adaptation of the international consensus/ORCA and EFCD

Objetivo: A cárie radicular é um problema da Odontologia moderna, porém é notável a falta de diretrizes sobre o seu manejo. Objetivamos elaborar e adaptar um guia a partir da tradução das recomendações do consenso in-ternacional European Organization for Caries Research (ORCA) e European Federation of Conservative Dentistry (EFCD) para as tomadas de decisão clínica na intervenção do processo de cárie na pessoa idosa, com foco na cárie radicular. Materiais e métodos: O protocolo de tradução das recomendações do consenso internacional consistiu nas etapas: (1) tradução inicial, (2) síntese da tradução, (3) retradução, (4) revisão por comitê de especialistas, com adaptação cultural. A partir da tradução, foi desenvolvido um guia com diretrizes para tratamento de cárie radicular no Brasil. Resultados: Para prevenção de novas lesões é recomendada a escovação diária com dentifrício >1.500ppm/F. Dentifrícios com 5.000ppm/F ou vernizes (>20.000ppm/F) podem ser indicados para paralisar lesões radiculares ativas e para prevenção em pessoas idosas com alta suscetibilidade à cárie radicular, e o Diamino Fluoreto de Prata (>30%) para paralisar lesões ativas. Intervenções invasi-vas diretas são indicadas dependendo da situação clínica. Discussão: Nota-se uma falta de interesse em estudos primários sobre tratamentos para cárie radicular, criando assim uma lacuna em relação ao seu manejo, que reflete no nível de evidência detectado pelo consenso. Conclusão: Guias clíni-cos são importantes para reduzir a lacuna entre a pesquisa e a prática clínica. Essa tradução para o português facilitará o acesso dos dentistas bra-sileiros em relação a evidência consolidada até o momento para o manejo de cárie radicular.

Aim: Root caries are a problem in modern dentistry, but the lack of guidelines regarding their management is notable. We aim to develop and adapt a guide based on the translation of the recommendations of the international consensus as outlined by the European Organization for Caries Research (ORCA) and the European Federation of Conservative Dentistry (EFCD) for clinical decision-making in the intervention of the caries process in the elderly, with a focus on root caries. Materials and methods: The protocol for translating the recommendations of the international consensus consisted of the following steps: (1) initial translation, (2) synthesis of the translation, (3) back-translation, (4) review by an expert committee with cultural adaptation. Based on the translation, a guide was developed with guidelines for the treatment of root caries in Brazil. Results: To prevent new lesions, daily brushing with toothpaste >1,500ppm/F is recommended. Toothpaste with 5,000ppm/F or varnishes (>20,000ppm/F) may be recommended to paralyze active root lesions and for prevention in elderly people with high susceptibility to root caries, and Silver Diamine Fluoride (>30%) to paralyze active lesions. Direct invasive interventions are indicated depending on the clinical situation. Discussion: There is a lack of interest in primary studies on treatments for root caries, thus creating a gap in relation to its management, which is reflected by the level of evidence detected in the consensus. Conclusion: Clinical guidelines are important to reduce the gap between research and clinical practice. This translation into Portuguese will facilitate access by Brazilian dentists to the consolidated evidence gathered to date for the management of root caries.

Residual Bacteriome after Chemomechanical Preparation of Root Canals in Primary and Secondary Infections.

INTRODUCTION: Secondary infections may be linked to the presence of residual microorganisms within dental root canals. The purpose of this study was to investigate the bacterial composition of primary and secondary root canal infections before and after chemomechanical treatment. METHODS: Samples were collected before chemomechanical preparation (S1) and before obturation (S2) from 19 subjects (10 primary and 9 secondary infections). DNA was extracted, and the V3/V4 region of the 16S ribosomal RNA gene was amplified using the 347 F/803R primers and paired-end sequenced using the MiSeq (Illumina, San Diego, CA) instrument. RESULTS: Sequencing analysis yielded partial 16S ribosomal RNA gene sequences that were taxonomically classified into 10 phyla and 143 genera. The most prevalent phyla in the S1 and S2 samples were Firmicutes and Bacteroides; however, when comparing between sample groups, Proteobacteria seem to have been enriched in secondary infections. The dominant genera in the primary S1 samples were Bacillus, Streptococcus, and Prevotella, whereas Bacillus, Streptococcus, and Selenomonas dominated the secondary infection S1 samples. Bacillus and Marinilactibacillus were the most dominant genera in the primary and secondary S2 samples. The mean number of operational taxonomic units per sample was 32,656 (±12,124 SD) and 37,113 (±16,994 SD) in the S1 and S2 samples, respectively. Alpha and beta diversities presented the same pattern within samples from both groups. CONCLUSIONS: Great interindividual variations in the bacterial composition of the root canal biofilms were observed. There was no difference in the bacterial composition before and after treatment, although some genera survived and seem to be part of a residual microbiome. Our findings revealed a high diversity of the bacterial communities present in root canal infections after chemomechanical treatment, although the majority of the taxa detected were in low abundance.

Traumatic dental injuries in the primary dentition and sequelae in the permanent dentition: a 7-year retrospective study / Lesões dentárias traumáticas na dentição decídua e sequelas na dentição permanente: um estudo retrospectivo de 7 anos

Objective: Traumatic dental injuries (TDIs) affect the aesthetics and function of primary teeth and can cause sequelae in their permanent successors. This study assessed the distribution of TDIs and sequelae in the primary dentition and the respective permanent dentition in children treated at the Dental Trauma Centre in Brazil. Material and Methods: This cross-sectional study was conducted by collecting data from 256 dental records over 7 years. Descriptive statistical analyses and the Fisher exact test were used (p=0.05). Results: Sixty-two patients presented with trauma in the deciduous teeth. TDIs were observed mostly in boys (64.50%) and in the 2 to 4-year age group (44.10%); most injuries occurred from fall from the child's own height (40.30%) and at home (71.20%). The most common type of trauma was subluxation (22.90%). The most prevalent clinical and radiographic sequelae were mobility (45.60%) and periapical lesion (31.80%), respectively. Regarding the permanent dentition, the most frequent sequela was hypomineralization (33.30%). Conclusion:According to this study, TDIs in deciduous teeth made up 29.24% of all the cases in the Dental Trauma Program. The major type of trauma in children was subluxation, with sequelae in both dentitions. Follow-up after trauma is important to the maintenance of primary dentition and to prevent and treat possible sequelae in the permanent dentition.(AU)

Objetivo: Lesões dentárias traumáticas (TDIs) afetam a estética e a função dos dentes decíduos e podem causar sequelas em sucessores permanentes. Este estudo avaliou a distribuição das TDIs e sequelas na dentição decídua e sua respectiva dentição permanente em crianças atendidas no Centro de Trauma Odontológico no Brasil. Material e Métodos: Trata-se de um estudo transversal realizado por meio da coleta de dados de 256 prontuários odontológicos ao longo de 7 anos. Foram utilizadas análises estatísticas descritivas e teste exato de Fisher (p <0,05). Resultados:Sessenta e dois pacientes apresentaram trauma na dentição decídua. As TDIs foram observadas principalmente em meninos (64,50%) e na faixa etária de 2 a 4 anos (44,10%); a maioria das lesões ocorreu por queda da própria altura (40,30%) e em casa (71,20%). O tipo de trauma mais comum foi a subluxação (22,90%). As sequelas clínicas e radiográficas mais prevalentes foram mobilidade (45,60%) e lesão periapical (31,80%), respectivamente. Em relação à dentição permanente, a sequela mais frequente foi a hipomineralização (33,30%). Conclusão: De acordo com este estudo, as TDIs em dentes decíduos foram de 29,24% de todos os casos do Programa de Trauma Dental. O principal tipo de trauma em crianças foi a subluxação, com sequelas em ambas as dentições. O acompanhamento após o trauma é importante para a manutenção da dentição decídua e para prevenir e tratar possíveis sequelas na dentição permanente. (AU)

Tratamiento de caries relacionada a radiación: una revisión de literatura

Resumen Caries relacionada a radiación es una complicación tardía frecuente de la radioterapia de cáncer de cabeza y cuello, ocasionada por efectos directos e indirectos de la radioterapia. El objetivo del presente trabajo es realizar una revisión y analizar literatura sobre el manejo de caries relacionada a radiación, materiales usados, fallas en el tratamiento y protocolo con mejores resultados; tres revisores independientes realizaron una búsqueda en diferentes bases de datos: PubMed, Lilacs y Web Of Science, determinando criterios de inclusión y exclusión para la selección. Estudios clínicos y revisiones indicaron que los materiales más usados son cemento ionómero de vidrio convencional, cemento ionómero de vidrio modificado con resina y resina compuesta con aplicaciones de flúor. Son necesarios más estudios para definir el mejor tratamiento que incluya técnica de preparación de la cavidad y material restaurador con mejores resultados. Se recomienda realizar estudios comparando diferentes sistemas adhesivos, concentraciones de flúor y restauraciones en dentina radicular.

Resumo Cárie relacionada à radiação é uma complicação tardia frequente da radioterapia de câncer de cabeça e pescoço, ocasionada por efeitos diretos e indiretos da radioterapia. O objetivo do presente trabalho é realizar uma revisão e analisar literatura sobre o tratamento de cárie relacionada à radiação, materiais usados, falhas no tratamento e manejo com melhores resultados; foi realizada uma busca em diferentes bases de dados: PubMed, Lilacs e Web Of Science, por três revisores independentes, usando critérios de inclusão e exclusão. Estudos clínicos e revisões de literatura indicam que os materiais mais usados são cimento de ionômero de vidro convencional, cimento de ionômero de vidro modificado com resina e resina composta com aplicações de flúor. Mais estudos são necessários para definir o melhor tratamento que inclua a técnica de preparo cavitário e material restaurador com melhores resultados. Recomenda-se a realização de estudos comparando diferentes sistemas adesivos, concentrações de flúor e restaurações em dentina radicular.

Abstract Radiation-related caries are a frequent late complication caused by the direct and indirect effects of head and neck cancer radiotherapy. This study aimed to review and analyze the literature on managing radiation-related caries, restorative materials, treatment failures, and treatment protocols. A search was conducted in Pubmed, Lilacs, and Web of Science by three independent reviewers, and inclusion and exclusion criteria were used for paper selection. According to clinical studies and literature reviews, the most used materials are conventional glass-ionomer cement, resin-modified glass-ionomer cement, and composite resin with fluoride applications. More studies are needed to determine the best treatment, including cavity preparation technique and restorative material with better results. We suggest conducting studies comparing various adhesive systems, fluoride concentrations, and root dentin restorations.

Impact of dental treatment and the severity of traumatic dental injuries on the quality of life of Brazilian schoolchildren.

BACKGROUND/AIMS: Traumatic dental injuries (TDI) are most prevalent during adolescence and infancy, and they have an important impact on the oral health-related quality of life (OHRQoL). The aim of this study was to assess the effect of dental treatment and the severity of TDI on the OHRQoL of schoolchildren in public schools in Brazil. MATERIALS AND METHODS: This cross-sectional study evaluated schoolchildren aged 11 to 14 years in Brasilia, Brazil. The criteria used for the examinations were TDI-O'Brien criteria; Dental caries-DMFT criteria; and malocclusion-the Dental Aesthetic Index. The impact of oral health on the children's quality of life was assessed with the Child Perceptions Questionnaire (CPQ11-14 ) that was completed by the children while on the school premises. Socio-demographic information was also collected from the parents. Statistical analysis was performed using non-parametric and association tests, as well as linear regression. RESULTS: A total of 20.2% of the students had some TDI in their permanent anterior teeth; 20% of traumatized teeth were treated, and 80% were not treated. Sorting by severity, 75.1% of the schoolchildren had a TDI involving only the enamel, and 24.9% had a TDI extending beyond the enamel. Significant differences were observed between the severity of a TDI and the total scores of CPQ11-14 (Kruskal-Wallis; p = 0.0026), emotional well-being (p = 0.0006), and social well-being (p = 0.0001) when the group with TDI extending beyond the enamel was compared with the other groups (control and with TDI involving only the enamel), even after adjustment for socio-demographic and clinical variables. For oral symptoms and functional limitation, no differences were observed among the groups. CONCLUSIONS: Dental trauma and fractures extending beyond the enamel, treated or not, have a negative impact on the OHRQoL of schoolchildren, suggesting effects on self-perception and in the social and emotional spheres.

Low-power laser and potassium oxalate gel in the treatment of cervical dentin hypersensitivity-a randomized clinical trial.

OBJECTIVE: To evaluate the effectiveness of different protocols for the treatment of cervical dentin hypersensitivity (CDH) in non-carious cervical lesions (NCCLs). MATERIALS AND METHODS: The CONSORT checklist was used to design this study. The sample with n = 74 participants (389 NCCLs) was randomly allocated into three groups: G1, potassium oxalate (Oxa-Gel BF); G2, GaAlAs (gallium-aluminum-arsenate) low-power laser (100 mW, 808nn, 60 J/cm2); and G3, potassium oxalate (Oxa-Gel BF) associated with the GaAlAs low-power laser. The CDH was triggered by the evaporative stimulus test (EST) and by the tactile stimulus test (TST). The visual analog scale (VAS) was used to quantify the degree of CDH. Changes in sensitivity were assessed from baseline over 3 weeks. Data were analyzed for NCCLs using mixed-effects models with unstructured direct product covariance structure (α = 0.05). RESULTS: After the first application, participants from G1 and G3 had a reduction in CDH (p < 0.05) compared with group G2 for TST. After the second application, G3 participants had a reduction in CDH (p < 0.05) in relation to G2 for both stimuli. Reduction in CDH (p < 0.05) occurred over 3 weeks for EST and TST for all groups; however, there was no difference between groups at the end of the therapies. CONCLUSION: Potassium oxalate was more effective in reducing immediate CDH. After four applications, all groups showed similar results for the reduction of CDH. CLINICAL RELEVANCE: GaAlAS laser irradiation and oxalate potassium gel could reduce the symptoms of CDH; thus, they are viable alternatives for the treatment of this condition. Chemical occlusion of dental tubules showed effective results after a shorter time interval. TRIAL REGISTRATION: Brazilian Clinical Trials Registration Platform under protocol number RBR-4ybjmt. http://www.braziliantrials.com/?keywords=RBR-4ybjmt&order=%7Eensaios.patrocinador_primario.

Reattachment of fractured teeth using a multimode adhesive: Effect of different rewetting solutions and immersion time.

BACKGROUND/AIMS: Following coronal tooth fracture, keeping the fragment hydrated is of the utmost importance in the tooth fragment bonding technique. The aim of this study was to evaluate the effects of different immersion times in different storage media on multimode adhesive bonding between reattached fragments and teeth. MATERIALS AND METHODS: A total of 195 bovine incisors were fractured and randomized into the following storage groups (n = 15): G0-control group (sound tooth); GA-saline solution: for 1 hour (A1) or 24 hours (A2); GB-artificial saliva: for 1 hour (B1) or 24 hours (B2); GC-coconut water: for 1 hour (C1) or 24 hours (C2); GD-tap water: for 1 hour (D1) or 24 hours (D2); GE-milk: for 1 hour (E1) or 24 hours (E2); GF-dry (dehydration): for 1 hour (F1) or 24 hours (F2). Tooth fragments were then reattached using a multimode adhesive in a self-mode technique with a flowable resin composite. Fracture resistance was evaluated in a universal testing machine under a compressive load (1 mm/min). The data were submitted to two-way analysis of variance and the post hoc Tukey test (5%). RESULTS: The group submitted to the dehydration factor (GF) exhibited a mean value of 599.1 ± 144.2 N, while those submitted to all hydration protocols (GA, GB, GC, GD, GE) exhibited a mean value of 751.8 ± 285.4 N. Dehydration significantly affected the fracture strength values (P = .005). No significant interaction between the rewetting solutions was observed (P > .05). CONCLUSIONS: Hydration of the tooth fragment increased fracture resistance, regardless of the storage solution and/or immersion time.

Early clinical performance of resin cements in glass-ceramic posterior restorations in adult vital teeth: A systematic review and meta-analysis.

STATEMENT OF PROBLEM: Dentists must regularly determine the best adhesive cementation protocol for glass-ceramic restorations on posterior teeth. The authors are aware of few in vivo follow-up studies and no meta-analyses, including clinical trials, regarding this clinically relevant topic, which merits further investigation. PURPOSE: The purpose of this systematic review and meta-analysis was to statistically analyze the clinical performance of glass-ceramic posterior restorations by using a descriptive synthesis based on the integrity of the tooth and restoration under different cementation protocols for self-adhesive or conventional resin cements. MATERIAL AND METHODS: The electronic databases Cochrane, LILACS, PubMed/MEDLINE, SciELO, Scopus, and Web of Science were used to identify relevant clinical trials. Non-peer-reviewed literature searches and hand searching were performed to find additional references. Language, participant's age, or time restrictions were not set. Restoration and tooth integrity were the 2 aspects considered for the meta-analysis. Statistical analyses were performed using a software program in which fixed or random effect models with risk ratios and 95% confidence intervals were applied. RESULTS: Three prospective randomized or quasirandomized clinical trials, published in English from 2012 onward, were selected and statistically analyzed. The integrity of the tooth and restoration was assessed at the baseline and 1 year after the restorative intervention. The statistical analyses did not show any significant differences between the intervention and control groups in terms of the integrity of the tooth and restoration. CONCLUSIONS: This meta-analysis indicated no clinical differences in the ceramic cementation using a self-adhesive or conventional resin cement after the 1-year follow-up period because both resin cements showed adequate properties for tooth and restoration integrity.

In vitro tooth reattachment techniques: A systematic review.

BACKGROUND/AIMS: Fragment reattachment is a procedure that offers advantages, such as preservation of tooth structure and maintenance of color, shape, and translucency of the original tooth. The aim of this study was to analyze the reattachment techniques used to restore anterior teeth fractured by trauma. MATERIALS AND METHODS: The PubMed, LILACS, Web of Science, Cochrane, and Scopus databases were searched in October 2016, and the search was updated in February 2017. A search of the gray literature was performed in Google Scholar and OpenGrey. Reference lists of eligible studies were evaluated to identify additional studies. Two authors assessed studies for inclusion and extracted the data. In vitro studies that evaluated permanent human teeth fractured by trauma were included. RESULTS: Twenty-one studies remained after screening. The bond strength between the fragment and the crown was evaluated in 119 experimental groups. Ten different techniques were evaluated as follows: no preparation, chamfer, bevel, anchors, overcontour, internal groove, no preparation associated with chamfer after reattachment, fragment dentin removal associated with chamfer after reattachment, bevel associated with overcontour, and groove associated with shoulder. Five different materials were used to reattach the fragment: bonding system, luting composite resin, flowable composite, microhybrid composite, and nanocomposite. CONCLUSION: Fragment reattachment using a technique with no preparation and an adhesive system associated with an intermediate composite with good mechanical properties can restore part of the resistance of the fractured tooth.

Effect of ethanol-dissolved rhodamine B marker on mechanical properties of non-simplified adhesives.

OBJECTIVES: Rhodamine B (RB) is commonly used to evaluate dental polymers, including dental bonding systems (DBS). For reliability assessments, its effect should not only allow visualization of the dentin-polymer interface but also must not interfere with the bonding of the DBS to dentin as measured by the microtensile bond strength and hardness tests. MATERIAL AND METHODS: Flat human dentin surfaces were prepared and randomly distributed (n = 10) into six groups: Adper Scotchbond Multi-Purpose (MP) or Clearfil SE Bond (SE) in concentrations of none/control, 0.02 or 0.1 mg/mL. These combinations were prepared through ethanol dissolution to improve their penetration into the dentin. All specimens were fabricated with Filtek Z250 (n = 10) and prepared for a microtensile bond test (µTBS) (0.5 mm/min) after 7 days and 6 months. The failure modes were determined using a stereomicroscope (×40). For the hardness test, flat human dentin blocks were prepared and treated as previously described (n = 6). The specimens were stored at 37 °C/48 h and were tested (Knoop indenter - 25 gF/10 s). Data were analyzed with two-way ANOVA and Tukey tests for multiple comparisons (α = 0.05). The effect of time was evaluated using the Student t-test. RESULTS: For 7-day µTBS, both the DBS and RB concentrations were significant factors (p < 0.01). After 6 months, only the RB concentration was significantly different. Adhesive failures were prevalent for all groups. Regarding hardness, the DBS differed only with the use of 0.10 mg/mL of RB. CONCLUSIONS: Ethanol-dissolved rhodamine B in concentrations of 0.02 and 0.10 mg/mL in non-simplified adhesives can affect the physical-mechanical properties of functional monomer-based systems rather more than those of BisGMA systems.

Prevalence of dental trauma in disabled persons seen at the dental clinic for special-needs patients of the Catholic University of Brasília (UCB) / Prevalência de traumatismo dentário em pacientes com deficiência atendidos na clínica de pacientes especiais da Universidade Católica de Brasília (UCB)

Introduction: In Brazil, dental trauma (DT) is considered a public health problem. However, few studies in the literature report the prevalence of DT in disabled persons (DP). Objective: The aim of this study was to assess the prevalence of DT among DP seen at the Dental Clinic for Special-Needs Patients (COPE) of the Catholic University of Brasília. Material and method: A retrospective, descriptive study analyzing 73 medical charts of DP seen at the COPE between 2014 and 2016 was conducted. Clinical and sociodemographic data were collected. The t-test was used to check for significant differences between the categories of the variables analyzed. The Statistical Package for Social Sciences (SPSS), version 23.0 (IBM Corporation, Armonk, NY, USA) was used for all statistical analyses (p < 0.05). Result: A DT prevalence of 33/73 (45.2%) was found among DP. The predominant type of fracture was crown fracture (26/33-78.8%). The majority of patients were over 20 years old (63/73 - 86.3%), at a proportion significantly higher than those for the other age categories (p < 0.008). The patients in the sample had a variety of diseases, predominantly in the following categories: mental (22/73- 30.1%), multiple (19/73-26%), and systemic (14/73-19.2%). Conclusion: A high prevalence of DT was found in DP, with the majority of cases being related to mental and multiple diseases. Further research is needed to assess the prevalence of DT in this patient group throughout the Federal District.

Introdução: No Brasil, o traumatismo dentário (TD) é considerado um problema de saúde pública. No entanto, poucos estudos na literatura relatam a prevalência de TD em pessoas com deficiência (PD). Objetivo: O objetivo deste trabalho foi avaliar a prevalência de TD em PD atendidas na Clínica de Pacientes Especiais da Universidade Católica de Brasília (COPE). Material e método: Este estudo seguiu um delineamento descritivo e retrospectivo, e foi realizado por meio da análise de 73 prontuários de PD atendidas na COPE entre 2014 e 2016. Foram coletados dados sociodemográficos e clínicos. O teste t foi utilizado entre as proporções para determinar se houve diferenças significativas entre as categorias das variáveis analisadas. O programa "Statistical Package for Social Sciences" (SPSS), versão 23.0 (IBM Corporation, Armonk, NY, EUA) foi utilizado nas análises (p<0,05). Resultado: Encontrou-se uma prevalência de TD de 33/73 (45,2%) entre os PD. A fratura predominante foi a do tipo coronária, com uma frequência de 26/33 (78,8%). A maioria dos pacientes tinha acima de 20 anos, com uma frequência de 63/73 (86,3%), significativamente maior do que as frequências das outras categorias (p < 0,008). Os pacientes da amostra apresentavam doenças variadas, sendo as mais prevalentes as das categorias mental, com frequência de 22/73 (30,1%), múltipla com 19/73 (26%), e sistêmica com 14/73 (19,2%). Conclusão: Foi encontrada uma alta prevalência de TD em PD, sendo a maioria dos casos relacionados a doenças mentais e múltiplas. Futuras pesquisas são necessárias para avaliar a prevalência de TD nesse grupo de pacientes em todo o Distrito Federal.

Comparative bonding ability to dentin of a universal adhesive system and monomer conversion as functions of extended light curing times and storage.

OBJECTIVES: The purpose of this in vitro study was to evaluate the bonding ability and monomer conversion of a universal adhesive system applied to dentin as functions of different curing times and storage. The results were compared among a variety of commercial adhesives. MATERIALS AND METHODS: Flat superficial dentin surfaces were exposed on human molars and assigned into one of the following adhesives (n = 15): total-etch Adper Single Bond 2 (SB) and Optibond Solo Plus (OS), self-etch Optibond All in One (OA) and Clearfil SE Bond (CSE), and Scotchbond Universal Adhesive in self-etch mode (SU). The adhesives were applied following the manufacturers' instructions and cured for 10, 20, or 40s. Specimens were processed for the microtensile bond strength (µTBS) test in accordance with the non-trimming technique and tested after 24h and 2 years. The fractured specimens were classified under scanning electron microscopy (SEM). Infrared (IR) spectra were obtained and monomer conversion (%) was calculated by comparing the aliphatic-to-aromatic IR absorption peak ratio before and after polymerization (n=5). Data were analyzed by 2-way ANOVA/Tukey's tests (α = 0.05). RESULTS: At 24-h evaluation, OA and CSE presented similar bond strength means irrespective of the curing time, whereas SB and SU exhibited significantly higher means when cured for 40s as did OS when cured for 20 or 40s (p < 0.05). At 2-year evaluation, only OA exhibited significantly higher bond strength when cured for 20 and 40s (p < 0.05). When the evaluation times were compared, OA also exhibited the same bonding ability when cured for longer periods of time (20 and 40s). All of the adhesives tested exhibited significantly lower monomer conversion when photoactivated according to the manufacturers' instructions (10s). CONCLUSIONS: Higher monomer conversions obtained with longer light exposure allow only higher immediate bond strength for most of the adhesives tested. After 2-year storage, only the self-etching adhesive Optibond All-In-One exhibited the same bonding ability when cured for longer periods of time.

Effects of the application techniques of self-adhesive resin cements on the interfacial integrity and bond strength of fiber posts to dentin.

OBJECTIVE:: To evaluate the influence of an application technique of a glass-fiber post using self-adhesive resin cements on the push-out bond strength and the presence of bubbles in the root thirds. The cements were either applied according to the manufacturer's instruction or using a commercial delivering system (Centrix), at which the cement pastes were collected and applied after manipulation. MATERIAL AND METHODS:: Self-adhesive resin cements (RelyX U200/3M ESPE-U200; Maxcem Elite/Kerr-MAX; Clearfil SA Cement/Kuraray-CSA) and a conventional cement (RelyX ARC/3M ESPE-ARC) were used to cement a post and applied either based on the manufacturer's instructions or using a Centrix syringe to deliver the cements directly onto the post of choice, or directly into canal. The roots were scanned with a micro-computed tomography (µCT) and then sectioned into nine 1-mm thick slices for a push-out bond strength test. The µCT images showed the percentage of bubbles in the root thirds (cervical, medium, and apical). Data were analyzed with three-way ANOVA/Tukey (α=0.05). RESULTS:: Triple interaction was not significant (p>0.05). The interaction "material" vs "root third" was not significant. A significant interaction was observed between "material" vs "application technique" (p<0.05). For ARC, U200, and MAX, significantly lower percentages of bubbles were observed when the Centrix syringe delivered the cements. Equivalent percentages of voids were observed for CSA, irrespective of the application technique (p>0.05). Significantly higher bond strength was observed when the self-adhesive resin cements were applied using the Centrix delivery system, in comparison with the manufacturer's instructions (p<0.05). Bond strength varied with the root third: cervical>medium>apical (p<0.05). No correlations were found between the bond strength and voids. CONCLUSIONS:: Bond strength and voids are negatively influenced by the conventional application technique for luting fiber posts. The delivery system (Centrix) seems to produce better results when cementing fiber posts.

Effects of the application techniques of self-adhesive resin cements on the interfacial integrity and bond strength of fiber posts to dentin

ABSTRACT Objective: To evaluate the influence of an application technique of a glass-fiber post using self-adhesive resin cements on the push-out bond strength and the presence of bubbles in the root thirds. The cements were either applied according to the manufacturer's instruction or using a commercial delivering system (Centrix), at which the cement pastes were collected and applied after manipulation. Material and Methods: Self-adhesive resin cements (RelyX U200/3M ESPE-U200; Maxcem Elite/Kerr-MAX; Clearfil SA Cement/Kuraray-CSA) and a conventional cement (RelyX ARC/3M ESPE-ARC) were used to cement a post and applied either based on the manufacturer's instructions or using a Centrix syringe to deliver the cements directly onto the post of choice, or directly into canal. The roots were scanned with a micro-computed tomography (μCT) and then sectioned into nine 1-mm thick slices for a push-out bond strength test. The μCT images showed the percentage of bubbles in the root thirds (cervical, medium, and apical). Data were analyzed with three-way ANOVA/Tukey (α=0.05). Results: Triple interaction was not significant (p>0.05). The interaction “material” vs “root third” was not significant. A significant interaction was observed between “material” vs “application technique” (p<0.05). For ARC, U200, and MAX, significantly lower percentages of bubbles were observed when the Centrix syringe delivered the cements. Equivalent percentages of voids were observed for CSA, irrespective of the application technique (p>0.05). Significantly higher bond strength was observed when the self-adhesive resin cements were applied using the Centrix delivery system, in comparison with the manufacturer's instructions (p<0.05). Bond strength varied with the root third: cervical>medium>apical (p<0.05). No correlations were found between the bond strength and voids. Conclusions: Bond strength and voids are negatively influenced by the conventional application technique for luting fiber posts. The delivery system (Centrix) seems to produce better results when cementing fiber posts.

Microabrasion and composite resin for re-establishing smile esthetics: a case report

Introduction:Dental hypomineralization such as dental fluorosis has increased in recent times leading to unaesthetic appearance of teeth. There are different treatment possibilities to improve the aesthetic appearance of hypomineralized enamel described in dental literature. The enamel microabrasion has been a feasible alternative, since it is a fast, safe, conservative, and easy to perform, which promotes good esthetic results. Moreover, this technique is a conservative method that improves the appearance of the teeth by restoring bright and superficial smoothness, without causing significant structural loss. The association of different techniques, such as direct composite resin, can provide good esthetic outcomes, but the etiology, intensity, and depth of stain should be considered to minimize dental structure loss. Objective: To describe an easy technique for managing dental fluorosis using enamel microabrasion in association with direct composite resin. Case report: A mixture of hydrochloric acid and silicon carbide was applied according the manufacturer's instructions. Subsequently, a direct composite resin was applied over the areas where the opacities were more evident. This conservative approach may be considered an interesting alternative treatment to remove fluorosis staining and to improve aesthetic appearance. Conclusion: enamel microabrasion combined with direct composite resin is a conservative and safe alternative method to treat enamel opacities from dental fluorosis. Therefore, this management provides satisfactory aesthetic results for the patient's smile.

The influence of hemostatic agents on dentin and enamel surfaces and dental bonding: a systematic review.

BACKGROUND: Hemostatic agents have been used clinically in dentistry for many years to control bleeding. The authors reviewed scientific publications in which researchers investigated the effects of hemostatic agents on dentin and enamel surfaces and on bonding of adhesive systems and resin cements. TYPES OF STUDIES REVIEWED: The authors screened PubMed and Scopus databases for studies in English published from 1980 to 2013. They read the titles and abstracts to identify literature that fulfilled the inclusion criteria. The authors included studies in which researchers evaluated the hemostatic action on the dentin and enamel surfaces or its influence on the bond strength of adhesive systems or resin cements. They used cross-referencing to identify more articles. RESULTS: Twenty in vitro studies met the inclusion criteria. Investigators in 12 of these studies evaluated the bond strength to contaminated dentin. Investigators in 10 of these studies reported a significant decrease in bond strength. Those in two studies evaluated the influence of a hemostatic agent on the dental enamel and reported decreases in bond strength. Researchers also reported significant increases in microleakage of self-etching adhesives on contaminated dentin. Scanning electron microscopy revealed partial removal of the smear layer or an etching effect of dentin as a result of the application of hemostatic agents on dentin. PRACTICAL IMPLICATIONS: Adhesive procedures may be affected adversely when performed on dentin and enamel contaminated by hemostatic agents. Hemostatic agents may induce changes in the dentin surface morphology. The results of this review indicate that the bond strength of self-etching adhesive systems is affected more negatively than is that of etch-and-rinse systems. The authors found that a 60-second application of ethylenediaminetetraacetic acid followed by a water spray restored the bond strength of a self-etching adhesive to dentin; use of phosphoric acid for 15 seconds followed by a water spray also was an effective cleaning method. Direct comparison of selected studies was not possible, however, mainly because of methodological differences hampering definitive conclusions.

Effects of solvent evaporation on water sorption/solubility and nanoleakage of adhesive systems.

OBJECTIVE: To evaluate the influence of solvent evaporation in the kinetics of water diffusion (water sorption-WS, solubility-SL, and net water uptake) and nanoleakage of adhesive systems. MATERIAL AND METHODS: Disk-shaped specimens (5.0 mm in diameter x 0.8 mm in thickness) were produced (N=48) using the adhesives: Clearfil S3 Bond (CS3)/Kuraray, Clearfil SE Bond - control group (CSE)/Kuraray, Optibond Solo Plus (OS)/Kerr and Scotchbond Universal Adhesive (SBU)/3M ESPE. The solvents were either evaporated for 30 s or not evaporated (N=24/per group), and then photoactivated for 80 s (550 mW/cm2). After desiccation, the specimens were weighed and stored in distilled water (N=12) or mineral oil (N=12) to evaluate the water diffusion over a 7-day period. Net water uptake (%) was also calculated as the sum of WS and SL. Data were submitted to 3-way ANOVA/Tukey's test (α=5%). The nanoleakage expression in three additional specimens per group was also evaluated after ammoniacal silver impregnation after 7 days of water storage under SEM. RESULTS: Statistical analysis revealed that only the factor "adhesive" was significant (p<0.05). Solvent evaporation had no influence in the WS and SL of the adhesives. CSE (control) presented significantly lower net uptake (5.4%). The nanoleakage was enhanced by the presence of solvent in the adhesives. CONCLUSIONS: Although the evaporation has no effect in the kinetics of water diffusion, the nanoleakage expression of the adhesives tested increases when the solvents are not evaporated.